### Project
cmake_minimum_required(VERSION 3.25)
set(CMAKE_EXPORT_COMPILE_COMMANDS ON)
project(
    HotReload
    VERSION 0.1.0
    DESCRIPTION "Cross-platform, cross-compiler C/C++ hot-reload library, plus its examples and tests"
    LANGUAGES CXX
)

# Machine-friendly identifier baked into every target as PROJECT_NAME_CODE
# (used by BuildHelpers.cmake's _finalize_module_target).
set(PROJECT_CODE_NAME "hotreload")

# All output-path configuration (out/, install/, dist/, docs/, and the
# bin/lib subdirectory names) lives in Configuration.cmake -- included
# early since the output-directory setup just below depends on it.
include("${CMAKE_CURRENT_SOURCE_DIR}/Configuration.cmake")

set(CMAKE_CXX_STANDARD 20)
set(CMAKE_CXX_STANDARD_REQUIRED ON)
set(CMAKE_CXX_EXTENSIONS OFF)

# Every static library in the project gets built with -fPIC by default --
# including vendored/fetched ones, whose own CMakeLists.txt we don't
# control and can't rely on to opt in themselves. Without this, a static
# dependency (ours or third-party) fails to link the moment it ends up
# pulled into a SHARED module: "recompile with -fPIC". Cheap on every
# platform that matters here; add_lib_module's STATIC branch also sets
# this per-target as a belt-and-braces fallback.
set(CMAKE_POSITION_INDEPENDENT_CODE ON)

# -------------------------------------------------------
# Generator guard -- require Ninja (single or multi-config)
# -------------------------------------------------------
if(NOT CMAKE_GENERATOR MATCHES "Ninja")
    message(WARNING
        "This project targets Ninja. "
        "Current generator: '${CMAKE_GENERATOR}'. "
        "Reconfigure with:  cmake -G Ninja  or  cmake -G \"Ninja Multi-Config\"")
endif()

# Single-config Ninja needs CMAKE_BUILD_TYPE at configure time.
# Ninja Multi-Config uses CMAKE_CONFIGURATION_TYPES instead (no BUILD_TYPE needed).
if(CMAKE_GENERATOR STREQUAL "Ninja")
    if(NOT CMAKE_BUILD_TYPE)
        set(CMAKE_BUILD_TYPE "Release" CACHE STRING
            "Build type (Debug|Release|RelWithDebInfo|MinSizeRel)" FORCE)
        message(STATUS "CMAKE_BUILD_TYPE not set -- defaulting to Release")
    endif()
    set_property(CACHE CMAKE_BUILD_TYPE PROPERTY STRINGS
        Debug Release RelWithDebInfo MinSizeRel)
endif()

# -------------------------------------------------------
# Flat output layout
# Multi-config generators (Ninja Multi-Config) append /<Config> by default.
# Override all four configs so both Ninja variants produce the same layout.
# Subdirectory names come from Configuration.cmake (RUNTIME_OUTPUT_SUBDIR
# etc.); the base directory is always CMAKE_BINARY_DIR, wherever -B points
# (scripts/build.sh defaults to out/build -- see Configuration.cmake).
# -------------------------------------------------------
foreach(_cfg Debug Release RelWithDebInfo MinSizeRel)
    string(TOUPPER "${_cfg}" _CFG)
    set(CMAKE_RUNTIME_OUTPUT_DIRECTORY_${_CFG} "${CMAKE_BINARY_DIR}/${RUNTIME_OUTPUT_SUBDIR}")
    set(CMAKE_LIBRARY_OUTPUT_DIRECTORY_${_CFG} "${CMAKE_BINARY_DIR}/${LIBRARY_OUTPUT_SUBDIR}")
    set(CMAKE_ARCHIVE_OUTPUT_DIRECTORY_${_CFG} "${CMAKE_BINARY_DIR}/${ARCHIVE_OUTPUT_SUBDIR}")
endforeach()

# -------------------------------------------------------
# RPATH strategy
# By default CMake builds with a temporary RPATH and relinks at install time
# to embed the final one. Ninja on Linux with Clang does not support that
# relink step and will error out. Setting this ON tells CMake to embed the
# install RPATH at build time so no relink is ever needed.
# This is safe here because all our RPATHs are $ORIGIN-relative, so the
# same value is correct for both the build tree and the installed layout.
# Guarded to non-Windows since RPATH is an ELF concept only.
# -------------------------------------------------------
if(NOT WIN32)
    set(CMAKE_BUILD_WITH_INSTALL_RPATH ON)
endif()

# -------------------------------------------------------
# options
# -------------------------------------------------------
option(BUILD_TESTS      "Build test binaries"      OFF)
option(BUILD_EXAMPLES   "Build example binaries"   OFF)
option(INSTALL_TESTS    "Install test binaries"    OFF)
option(INSTALL_EXAMPLES "Install example binaries" OFF)

# Project-wide default for add_lib_module() when a module doesn't pass
# TYPE explicitly. This is CMake's own BUILD_SHARED_LIBS variable, so it
# also affects any third-party add_library() calls (FetchContent, etc.)
# that respect it. Override per-module with add_lib_module(... TYPE
# STATIC|SHARED ...), or globally with -DBUILD_SHARED_LIBS=ON.
option(BUILD_SHARED_LIBS "Build libraries as SHARED by default" OFF)

# INSTALL_* implies BUILD_* so targets exist when cmake --install runs
if(INSTALL_TESTS)
    set(BUILD_TESTS ON CACHE BOOL "" FORCE)
endif()
if(INSTALL_EXAMPLES)
    set(BUILD_EXAMPLES ON CACHE BOOL "" FORCE)
endif()

message(STATUS "BUILD_TESTS      = ${BUILD_TESTS}")
message(STATUS "BUILD_EXAMPLES   = ${BUILD_EXAMPLES}")
message(STATUS "BUILD_SHARED_LIBS (default lib TYPE) = ${BUILD_SHARED_LIBS}")

# -------------------------------------------------------
# DIST_TARGET resolution
#
# Preferred: pass -DDIST_TARGET=<value> explicitly, or use a CMakePresets.json
# preset (Visual Studio and CLion pick these up automatically).
#
# Fallback: if DIST_TARGET is not set, auto-detect from the compiler and
# platform. This keeps the project openable directly in an IDE without any
# preset selected, at the cost of skipping architecture validation.
#
# Valid explicit values:
#   linux-x64-gcc     linux-x64-clang
#   windows-x64-msvc  windows-x64-clang
# -------------------------------------------------------
if(NOT DIST_TARGET)
    if(WIN32)
        if(CMAKE_CXX_COMPILER_ID STREQUAL "Clang")
            set(DIST_TARGET "windows-x64-clang")
        else()
            # cl.exe reports MSVC; treat anything else on Windows as MSVC too.
            set(DIST_TARGET "windows-x64-msvc")
        endif()
    else()
        if(CMAKE_CXX_COMPILER_ID STREQUAL "GNU")
            set(DIST_TARGET "linux-x64-gcc")
        else()
            set(DIST_TARGET "linux-x64-clang")
        endif()
    endif()
    message(STATUS "DIST_TARGET not set -- auto-detected: ${DIST_TARGET}")
    message(STATUS "  (use CMakePresets.json or -DDIST_TARGET=<value> to set it explicitly)")
else()
    message(STATUS "DIST_TARGET    = ${DIST_TARGET}")
endif()

# -------------------------------------------------------
# Platform / compiler metadata from DIST_TARGET
# -------------------------------------------------------
if(DIST_TARGET STREQUAL "linux-x64-gcc")
    set(PLATFORM "linux")
    set(ARCHITECTURE "x64")
    set(COMPILER_ID "gcc")
elseif(DIST_TARGET STREQUAL "linux-x64-clang")
    set(PLATFORM "linux")
    set(ARCHITECTURE "x64")
    set(COMPILER_ID "clang")
elseif(DIST_TARGET STREQUAL "windows-x64-msvc")
    set(PLATFORM "windows")
    set(ARCHITECTURE "x64")
    set(COMPILER_ID "msvc")
elseif(DIST_TARGET STREQUAL "windows-x64-clang")
    set(PLATFORM "windows")
    set(ARCHITECTURE "x64")
    set(COMPILER_ID "clang")
else()
    message(FATAL_ERROR
        "Unsupported DIST_TARGET: '${DIST_TARGET}'.\n"
        "Valid values: linux-x64-gcc  linux-x64-clang  "
        "windows-x64-msvc  windows-x64-clang\n"
        "Tip: open CMakePresets.json in your IDE to select a preset, "
        "or pass -DDIST_TARGET=<value> on the command line.")
endif()

message(STATUS "Platform     = ${PLATFORM}")
message(STATUS "Architecture = ${ARCHITECTURE}")
message(STATUS "Compiler     = ${COMPILER_ID} (${CMAKE_CXX_COMPILER_ID} ${CMAKE_CXX_COMPILER_VERSION})")

# -------------------------------------------------------
# Global compiler settings
# MSVC is TRUE for both cl.exe and clang-cl (Clang targeting the MSVC ABI),
# so this block covers both Windows compiler variants.
#
# /MP              -- parallel file compilation (Windows only; guarded
#                     because Ninja drives parallelism on Linux and
#                     clang-cl warns if passed /MP there)
# /EHsc            -- standard C++ exception handling
# /Zc:preprocessor -- conformant preprocessor (fixes __VA_ARGS__ etc.)
# /utf-8           -- UTF-8 source + execution charset
# -------------------------------------------------------
if(MSVC)
    if(WIN32)
        add_compile_options(/MP)
    endif()
    add_compile_options(/EHsc /Zc:preprocessor /utf-8)
    add_compile_definitions(_CRT_SECURE_NO_WARNINGS)
endif()

# -------------------------------------------------------
# Build machinery (macros/functions) -- see cmake/BuildHelpers.cmake.
# This file should change rarely; it holds nothing project-specific.
# -------------------------------------------------------
include("${CMAKE_CURRENT_SOURCE_DIR}/cmake/BuildHelpers.cmake")

# -------------------------------------------------------
# Third-party dependencies -- see cmake/Dependencies.cmake for
# add_vendor_header_only / add_vendor_subdirectory / add_dependency.
# A module declares its own dependencies in its own CMakeLists.txt (see
# source/HotReload/CMakeLists.txt for an example); nothing to add here.
# -------------------------------------------------------
include("${CMAKE_CURRENT_SOURCE_DIR}/cmake/Dependencies.cmake")

# -------------------------------------------------------
# Documentation -- see cmake/Documentation.cmake. Every module
# automatically gets its own Doxygen target the moment Doxygen is
# installed; nothing to add here or in a module's own CMakeLists.txt
# unless you want to opt a module out (NO_DOCS) or override a Doxyfile
# setting (-DDOXYGEN_<TAG>=...).
# -------------------------------------------------------
include("${CMAKE_CURRENT_SOURCE_DIR}/cmake/Documentation.cmake")

# -------------------------------------------------------
# Hot reload -- see cmake/HotReload.cmake for
# hot_reload_enable_patchable_functions(<target>). Call it on any
# SHARED module target you intend to hot-reload via source/HotReload;
# see source/examples/HotReloadDemo for a full worked example.
# -------------------------------------------------------
include("${CMAKE_CURRENT_SOURCE_DIR}/cmake/HotReload.cmake")

# -------------------------------------------------------
# Module discovery
#
# Every module lives in its own directory with its own CMakeLists.txt --
# usually a single add_lib_module/add_exe_module/add_test_module/
# add_example_module(...) call (see cmake/BuildHelpers.cmake for what each
# accepts). This file never needs editing to add, remove, or reconfigure
# a module: just add or remove the module's directory + CMakeLists.txt.
#
#   source/<Name>/CMakeLists.txt          -- library or app/executable module
#   source/tests/<Name>/CMakeLists.txt    -- test module
#   source/examples/<Name>/CMakeLists.txt -- example module
#
# (source/tests and source/examples aren't picked up by the first call
# below -- they have no CMakeLists.txt directly inside them, only their
# own children do, so they're only ever visited by their dedicated calls.)
#
# _discover_module_subdirectories() add_subdirectory()s every matching
# directory automatically; CONFIGURE_DEPENDS means the next build
# reconfigures on its own once a module directory is added or removed.
# -------------------------------------------------------
_discover_module_subdirectories("${CMAKE_SOURCE_DIR}/source")
_discover_module_subdirectories("${CMAKE_SOURCE_DIR}/source/tests")
_discover_module_subdirectories("${CMAKE_SOURCE_DIR}/source/examples")

# Emits <build-dir>/module_manifest-<CONFIG>.txt ("target_name=path_to_binary"
# per line) for every executable module discovered above. scripts/run.sh / run.bat
# read this to resolve a CMake target name to its binary -- must run after
# discovery.
_write_module_manifest("${CMAKE_BINARY_DIR}")

# Writes out/docs/index.html (DOCS_OUTPUT_DIR, see Configuration.cmake)
# linking to every module's generated documentation (a no-op if
# ENABLE_DOXYGEN is off) -- must run after discovery, same reasoning as
# the manifest above.
_write_docs_index("${DOCS_OUTPUT_DIR}")

# -------------------------------------------------------
# Copy compile_commands.json to the project root once it's fully
# populated, so clangd/clang-tidy/IWYU find it without extra config (most
# editors look for it at the repo root or search upward from the source
# file; CMake only ever writes it into the build directory). Runs at
# build time, by which point CMake's own generate step has already
# written build/compile_commands.json, so this works even on the very
# first build with no prior build directory. Vendored and fetched
# dependencies are excluded from it (see cmake/Dependencies.cmake) so it
# only reflects code this project owns.
# -------------------------------------------------------
if(CMAKE_EXPORT_COMPILE_COMMANDS)
    add_custom_target(copy_compile_commands ALL
        COMMAND ${CMAKE_COMMAND} -E copy_if_different
            "${CMAKE_BINARY_DIR}/compile_commands.json"
            "${COMPILE_COMMANDS_DESTINATION}"
        COMMENT "Copying compile_commands.json to project root"
        VERBATIM
    )
endif()

# -------------------------------------------------------
# install
# -------------------------------------------------------
set(_pmn_install_target_dir ${INSTALL_OUTPUT_DIR}/${DIST_TARGET})

# primary
set(RUNTIME_OUT_DIR  ${_pmn_install_target_dir}/${RUNTIME_OUTPUT_SUBDIR})
set(LIBRARY_OUT_DIR  ${_pmn_install_target_dir}/${LIBRARY_OUTPUT_SUBDIR})
set(ARCHIVE_OUT_DIR  ${_pmn_install_target_dir}/${ARCHIVE_OUTPUT_SUBDIR})

# tests -- runtime/library -> bin/tests/   archives -> lib/tests/
set(TEST_RUNTIME_OUT_DIR ${_pmn_install_target_dir}/${RUNTIME_OUTPUT_SUBDIR}/tests)
set(TEST_LIBRARY_OUT_DIR ${_pmn_install_target_dir}/${LIBRARY_OUTPUT_SUBDIR}/tests)
set(TEST_ARCHIVE_OUT_DIR ${_pmn_install_target_dir}/${ARCHIVE_OUTPUT_SUBDIR}/tests)

# examples -- runtime/library -> bin/examples/   archives -> lib/examples/
set(EXAMPLE_RUNTIME_OUT_DIR ${_pmn_install_target_dir}/${RUNTIME_OUTPUT_SUBDIR}/examples)
set(EXAMPLE_LIBRARY_OUT_DIR ${_pmn_install_target_dir}/${LIBRARY_OUTPUT_SUBDIR}/examples)
set(EXAMPLE_ARCHIVE_OUT_DIR ${_pmn_install_target_dir}/${ARCHIVE_OUTPUT_SUBDIR}/examples)

# Every install(TARGETS ...) below is tagged COMPONENT ${PROJECT_CODE_NAME}.
# A vendored/fetched dependency's own CMakeLists.txt (see
# cmake/Dependencies.cmake) usually has install() rules of its own, with
# no COMPONENT tag -- installing with `cmake --install build` (no
# --component filter) would pull those in too, typically under
# CMAKE_INSTALL_PREFIX (e.g. /usr/local). scripts/install.sh / install.bat always
# pass --component ${PROJECT_CODE_NAME} so only this project's own
# artifacts are installed; use the same flag if you invoke cmake --install
# directly.
message(STATUS "Will install primary modules.")
get_property(_pmn_primary_targets GLOBAL PROPERTY PMN_MODULE_TARGETS_PRIMARY)
if(_pmn_primary_targets)
    install(TARGETS ${_pmn_primary_targets}
        COMPONENT ${PROJECT_CODE_NAME}
        ARCHIVE DESTINATION ${ARCHIVE_OUT_DIR}
        LIBRARY DESTINATION ${LIBRARY_OUT_DIR}
        RUNTIME DESTINATION ${RUNTIME_OUT_DIR}
    )
endif()

# Both blocks below read whatever test/example modules discovery actually
# found -- no target names to keep in sync here when a module is added,
# removed, or renamed.
if(INSTALL_TESTS)
    get_property(_pmn_test_targets GLOBAL PROPERTY PMN_MODULE_TARGETS_TEST)
    if(_pmn_test_targets)
        message(STATUS "Will install test modules: ${_pmn_test_targets}")
        install(TARGETS ${_pmn_test_targets}
            COMPONENT ${PROJECT_CODE_NAME}
            ARCHIVE DESTINATION ${TEST_ARCHIVE_OUT_DIR}
            LIBRARY DESTINATION ${TEST_LIBRARY_OUT_DIR}
            RUNTIME DESTINATION ${TEST_RUNTIME_OUT_DIR}
        )
    else()
        message(WARNING "INSTALL_TESTS is ON but no test modules were found under source/tests/.")
    endif()
endif()

if(INSTALL_EXAMPLES)
    get_property(_pmn_example_targets GLOBAL PROPERTY PMN_MODULE_TARGETS_EXAMPLE)
    if(_pmn_example_targets)
        message(STATUS "Will install example modules: ${_pmn_example_targets}")
        install(TARGETS ${_pmn_example_targets}
            COMPONENT ${PROJECT_CODE_NAME}
            ARCHIVE DESTINATION ${EXAMPLE_ARCHIVE_OUT_DIR}
            LIBRARY DESTINATION ${EXAMPLE_LIBRARY_OUT_DIR}
            RUNTIME DESTINATION ${EXAMPLE_RUNTIME_OUT_DIR}
        )
    else()
        message(WARNING "INSTALL_EXAMPLES is ON but no example modules were found under source/examples/.")
    endif()
endif()
